HIGH POWER, ELECTRONIC SIREN GEMINI 7147
DESCRIPTION.
GEMINI 7147 is 2 wires, high power electronic siren designed to be installed quickly and simply in the
engine compartment.
WIRING CONNECTIONS (for the installer)
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
Wires Function
RED éé Battery positive (12V)
BLACK éé Alarm YELLOW-BLACK wire.
NOTE: connect the BLACK wire of the unit to earth.
INSTALLATION.
Install the siren in the engine compartment away from areas of intense heat using the bracket and the
screws supplied with the kit and turn to low the siren ear trumpet to avoid water infiltration.
Protect the wires from water and humidity and to avoid any damaging do not steam clean directly to the
siren.
SELF-POWERED, HIGH POWER GEMINI 7025
DESCRIPTION.
Gemini 7025 is a self-powered, high power, electronic siren studied to install in the engine compartment of
the vehicle.
away from areas of intense heat.
To install the siren use the bracket and the screws supplied with the kit and follow the fitting diagram.
WIRING CONNECTIONS (for the installer)
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
Wires Function
BLACK marked RB ê Battery positive terminal
BLACK marked MB ê Battery negative terminal
BLACK marked S ê To the alarm PINK wire
BLACK marked R ê To the alarm RED wire
BLACK marked L ê To the alarm BLUE wire
Connect one end of the BLACK initialled V wire to the bonnet pin switch and the other end to the alarm
GREEN wire.
NOTE: To disarm the alarm unit and the engine immobilisation, turn the siren key to off. The internal
battery recharges with alarm disarmed.
Technical data
Power supply 12 V
Current absorption alarm ON 3 mA
Current absorption alarm OFF 7 mA
Audible tone > 118 dB
IF YOU WANT TO WASH THE ENGINE OF THE CAR DO NOT STEAM CLEAN THE SIREN
This device is guaranteed against any manufacturing or working fault for 24 months from manufacturing date
indicated on the warranty label. The absence of the label will annul the warranty. The manufacturer declines
every responsibility for any defect or failure to the device and to the electric plant of the vehicle due to an incorrect
installation or to the alteration of the technical data stated in this manual.
To Next Page
Loading...
Need help?
General
