1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
15.0
16
17.0
- PRELIMINARY ADVICE.............................................................................................
- OPERATING DESCRIPTION.....................................................................................
2.1 - Complete system arming.........................................................................................
2.2 - System arming with sensor and comfort control exclusion......................................
2.3 - Passive arming.........................................................................................................
2.4 - Arming inhibit time....................................................................................................
2.5 - System armed..........................................................................................................
2.6 - Alarm, inhibit time between alarms and alarm cycles..............................................
2.7 - System disarming.....................................................................................................
2.8 - Emergency disarming by electronic key...................................................................
2.9 - Alarm memory...........................................................................................................
WARRANTY CONDITIONS .................................
- WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) DIRECTIVE.......
- TECHNICAL SPECIFICATIONS................................................................................
- CONNECTORS TABLES............................................................................................
6.1 - 20-way connector.....................................................................................................
6.2 - 8-way connector.......................................................................................................
- COMPLETE ELECTRIC DIAGRAM...........................................................................
- WIRING DIAGRAMS FOR TURN INDICATORS............................... ...........
..........................................................................................
..........................................................
8.0 - Connection to hazad push-button.............................................................................
- SELECTION OF CENTRAL DOOR LOCKING CONNECTIONS TO ARM/DISARM
THE SYSTEM.............................................................................................................
..........................
..............................................
9.3 - Connections to turn indicators..................................................................................
9.4 - “Mixed” connection option........................................................................................
SYSTEM PROGRAMMING.............. ....................................
........................................................................................
.........................................................................
12.3 - Passive arming.......................................................................................................
12.4 - Enabling 5T) ......................................................................
12.5 - Doors switch polarity selection...............................................................................
12.6 - Negative output s ................
..............................................
................................................................
- ............................................................
..........................................................
............................................................................
..........................................................................................
- SYSTEM RESET......................................................................................................
USER MANUAL
INSTALLER MANUAL
- .......................................................
..............
8.1 - Standard connections.....
8.2 - Connections for vehicles with separate lines..
9.1 - Connections and management by CAN-BUS line..........................
9.2 - Connections to door lock motor unit...........................
- VEHICLE CODE PROGRAMMING..........................................................................
- SELF-LEARNING OF TURN INDICATORS FLASHES............................................
- ....................................
12.1 - Optical signals................
12.2 - Acoustic signals.............................
of siren (art. 772 output
election (during alarm) for horns or additional siren...
- SYSTEM PROGRAMMING EXAMPLE......................
- ADDITION OF NEW DEVICES.................
DELETION OF PROGRAMMED DEVICES.
- ULTRASONIC VOLUMETRIC PROTECTION
16.1 - Connections and positioning......
16.2 - Sensor adjustment........
10.0
11.0
12.0
13.0
14.0
.0
PAGE 02
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 03
PAGE 04
PAGE 04
PAGE 04
PAGE 06
PAGE 06
PAGE 06
PAGE 07
PAGE 08
PAGE 08
PAGE 12
PAGE 12
PAGE 12
PAGE 12
PAGE 12
PAGE 12
PAGE 13
PAGE 14
PAGE 14
PAGE 15
PAGE 15
PAGE 15
PAGE 15
PAGE 04
PAGE 04
PAGE 05
PAGE 05
PAGE 08
PAGE 08
PAGE 09
PAGE 09
PAGE 09
PAGE 09
PAGE 09
PAGE 10
PAGE 11
PAGE 12
TABLE OF CONTENTS
UK
USER MANUAL - PAGE 03
1.0 - PRELIMINARY ADVICE
Dear Customer, th .
:
e present manual illustrates the 931T alarm system
The following signs, intended for the installer or the user, indicate particular functions or connections
as follows
For the installer.
This sign indicates that the system will work according to the connections and the
programming selected or it simply provides useful installation tips.
!
For the user.
This sign highlights useful information.
2.0 - OPERATING DESCRIPTION
Exclusion of sensors and comfort feature is bound to each single arming
cycle.
USER MANUAL
2.3-PA
When this function is programmed, the system passively arms about 60” after ignition is switched off
and after the last door is opened and closed.
System activation is indicated by the standard optic/acoustic signal.
SSIVE ARMING
If passive arming is activated, internal sensors and comfort output (automatic windows
roll-up) are excluded.
Opening a door 60” before the system is armed causes the procedure to interrupt; it is
resumed once the door is closed.
2.1 - COMPLETE SYSTEM ARMING
2.2 - SYSTEM ARMING WITH SENSOR AND COMFORT CONTROL EXCLUSION
Press the lock button on the original remote control of the vehicle; system arming is confirmed by one
acoustic signal of the siren and one flash of the turn signals.
).
T
To activate this feature, the system should be disarmed and the ignition key turned “OFF”; proceed as
follows.
Insert the electronic key into the specific receptacle; the LED will flash quickly.
.
!
!
!
The system has a 30” pre-arming “neutral time” (indicated by the LED turned on steady
he driver can arm the system and exclude the internal volumetric protection and comfort function.
Close vehicle doors and press the lock button on the original remote control
indicated by an acoustic signal with low tone and a flash of turn indicators.System activation is
2.4 - ARMING INHIBIT TIME
2.5 - SYSTEM ARMED
System inhibit arming time lasts approximately 30” and is indicated by the LED on;
.
After the inhibit time the system is “armed” and ready to detect any theft attempt.
When the system is fully armed, the LED flashes.
it is possible to exit
the vehicle without triggering any alarm
To Next Page
Loading...
Need help?
General
