CONTROLS AND THEIR FUNCTIONS
(6)
8)Low
9)Low
Level Gain Adjust
Level Frequency Contour, set up so
as to integrate with main loudspeakers. In
the L.F.E. Position the filter is opened wide
to allow the optimum performance from
processor built in bass filtering.
10)Continuously Variable Phase Control
11)Power Off/On Switch
12)IEC mains input connector. (Fuse
Drawer contains spare 1.6AT fuse)
LEFT
RIGHT
HI LEVEL INPUT
LOW LEVEL INPUT
(Mono)
PHASE
0
180
0
0
HI LEVEL
GAIN
Min
Max
LO LEVEL
GAIN
Min
Max
30Hz
120Hz
30Hz
120Hz
HI LEVEL
FREQ
LO LEVEL
FREQ
(LFE)
30
60
90
100
150
WATTS
RMS
TO AVOID RISK OF ELECTRIC SHOCK DO NOT REMOVE
PANEL NO USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
230V
50-60Hz
T1.6 AL
POWER INLET
POWER
30
LFE
2
1
6 7 8 9 10
3
5
11
12
4
1) High Level Input connector for
connection to amplifier output
2) Low Level Input RCA connectors for
connection to pre-amp output, Dolby
output or other dedicated sub outputs.
3)High Level Upper Roll Off Frequency.
4)Power Output Meter.
5)Low Level Upper Roll Off Frequency.
6)High Level Gain Adjust
7)High Level Frequency Contour, set up so
as to integrate with main loudspeakers.
Designed and manufactured by :-
www.bkelec.com
+44 (0)1702 527572
B.K. Electronics
Southend-On-Sea
Essex. England
Gemini II 150W
Sub Bass System
To Next Page
Loading...
Need help?
General
