Steel frame and heavy duty base for
greater stability.
High quality conveyor belt for longer
service life.
Parallelism between the sanding drums
and the conveyor belt is adjusted by con-
venient adjustment screw.
Large hand wheel adjusts conveyor table
height.
Magnetic safety switch.
Two (2) 4” dust outlets.
Graduated depth scale in both inches and
metric to indicate sanding thickness.
Conveyor belt equipped with a safety
switch with removable key.
Dual v-belt driven sanding drums.
Variable speed conveyor belt.
MAXIMUM SANDING WIDTH
24» (610 mm)
MAXIMUM SANDING THICKNESS
5” (127 mm)
MINIMUM SANDING THICKNESS
1⁄4” (6 mm)
MINIMUM SANDING LENGTH
5” (127 mm)
DRUM DIAMETER
5” (127 mm)
DRUM SPEED
1550 RPM
FEEDING SPEED
3 to 20 FPM (0.93 – 6.2 M/MIN)
VARIABLE
BASE DIMENSIONS (L X W)
42 1/2” x 16 1/2” (1079.5 x 419 mm)
MAIN MOTOR
3 HP, 220 V, 1 Ph, 15 A
CONVEYOR MOTOR
1/6 HP
WEIGHT
570 LBS (259 kg)
REVISION 3 - APRIL 04/14
© COPYRIGHT GENERAL INTERNATIONAL
To Next Page
Need help?
General
