GEW130 Mixer operation instruction Rev. a
etc. 3
rd
speed (high speed) is proper.
*** Warning: Do not use medium or high speed for kneading dough.
4. Maintenances
a. After using, you should clean the bowl and agitator ect, make sure to
keep the machine clean.
b. The transmission gear box is packed with special grease, it could be
used for six mouths in normal condition. If it need to add or replace
the grease, please open the top cover ,then pour the grease from
aperture or replace the grease directly.
5.Problems and solutions
Problems Causes Solutions
The mixing shaft
doesn’t rotate after
starting the machine
Electric connectors are
loose
Check the electric
circuit, tighten those
loose connects
Oil leakage The oil seals are worn
out
Replace those oil seals
Too low voltage Check the power
supply
Over-load Lessen the quantity of
the mixture
The temperature of the
motor becomes higher
and the rotating speed
becomes lower
The speed of mixing is
too high or the mixing
is not suitable
Select a suitable speed
and mixing
The mixing knocks
with the bowl
The mixing or the
bowl is deformed
repair or replace the
mixing or bowl
The noise of the
gearbox is serious, its
temperature is too high
Lubrication is
insufficient
Add or replace the
grease
page 3 of 3
To Next Page
Loading...
Need help?
General
