WOOD SPECIES CALIBRATION TABLES
Setting No. of wood type
01 02 03 04 05 06 07 08
Pacific maple Japan china fir Europe fine-grained wood Britain elm tree Quassia Bodhi tree Christmas tree Europe birch
The torrid zone Japan elm Camphor tree White elm tree Hickory tree Persimmon tree Pomegranate tree India
balsa wood China fir
Yellow birch Douglas fir West America New Zealand West American Amboyna Rubber tree Africa redwood
wood redwood pine wood fallen leaf pine mahogany padauk
Yellow poplar Southern ocean Chestnut tree Padauk Alive tree Europe cherry wood
rubber wood
Africa cypress American redwood Japan cypress Fig tree Japan cypress
18~28mc 8~18mc
American red Africa alive tree Green hard hardwood Teak tree Japan spruce
rubber wood 8~18mc
Oak Southern West American Africa walnut tree
ocean pine hemlock spruce
Scotland pine Japan pine Philippine mahogany
Yellow pine Fallen leaf pine
Europe Malaysia
redwood oak
American American
walnut tree pine tree
Korean pine
Japan spruce
18~28mc
Europe spruce
Europe
walnut tree
Yew
WARRANTY INFORMATION
General Tools & Instruments’ (General’s) MM70D Precision Digital Moisture
Meter with RS232 Output is warranted to the original purchaser to be free
from defects in material and workmanship for a period of one year. Subject
to certain restrictions, General will repair or replace this instrument if, after
examination, the company determines it to be defective in material or
workmanship. The warranty period begins on the date of purchase.
You are encouraged to register your product online. General will extend
your warranty an additional 60 days if you register at
www.generaltools.com/ProductRegistry.
This warranty does not apply to damages that General determines to be from
an attempted repair by non-authorized personnel or misuse, alterations,
normal wear and tear, or accidental damage. The defective unit must be
returned to General Tools & Instruments or to a General-authorized service
center, freight prepaid and insured.
Acceptance of the exclusive repair and replacement remedies described
herein is a condition of the contract for purchase of this product. In no event
shall General be liable for any incidental, special, consequential or punitive
damages, or for any cost, attorneys’ fees, expenses, or losses alleged to be a
consequence of any damage due to failure of, or defect in any product
including, but not limited to, any claims for loss of profits.
Register now at www.generaltools.com/ProductRegistry to receive a 60-day
extension to your warranty.
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a reliable product of superior
quality. However, in the event your instrument requires repair, please contact
our Customer Service to obtain an RGA (Return Goods Authorization) number
before forwarding the unit via prepaid freight to the attention of our Service
Center at this address:
General Tools & Instruments
80 White Street New York, NY 10013 212-431-6100
Remember to include a copy of your proof of purchase, your return address,
and your phone number and/or e-mail address.
To Next Page
Loading...
Need help?
General
