Warming Up the Engine
To protect the engine, please warm up the engine 1-3 minutes before riding. Do not immediately
accelerate when the engine is cold.
Note: Please read the section on “Engine Break-In” on page xx before initial riding.
• Scooter riding (after warming up the engine)
1. Hold the brake lever and push down the center or side stand.
2. Adjust the rear view mirrors to allow a clear view of what is behind you.
3. Test the headlight, tail light, and turn signals.
• Accelerating
1. Use the throttle grip to control your speed. Rotating the throttle grip towards you will increase
your speed. Rotating the throttle grip away from you will decrease your speed.
To Next Page
Loading...
Need help?
General
