11
KEBAB ATTACHMENT
The kebab attachment is ideal for cooking kebabs etc. It gently rotates the
food under the heating element for even cooking. The attachment can hold
10 skewers.
1. Slide the circular kebab holder plate onto the spindle. Orient this plate
so that the part with the screw in it is at the same end as the black drive
coupling. Slide the plate which has the slots in the rim onto the spindle
with the screw facing outwards away from the other plate. There are
two depressions on the face of the spindle. When securing the plates,
make sure that the screws go into the depressions in the spindle before
tightening (g. L).
2. Place the food onto the skewers. Fit the end of the skewer into a hole in
the plate (g. M).
3. Fit the other end into the slot opposite the hole (g. N).
4. Push the skewer forward until the curved end of the skewer clips into
the hole below the slot (g. P).
5. When all the skewers have been tted, t the kebab attachment into the
bowl in the same way as the rotisserie attachment.
6. Operate your air fryer in the same way as when using the rotisserie
attachment (See ROTISSERIE ATTACHMENT).
HINTS AND TIPS
• Don’t put food that has a coating such as breadcrumbs into the drum
or sandwich basket because the rotating/tumbling action will shake the
coating from the food during cooking.
• Don’t overll the drum or sandwich basket because this can restrict hot
air ow which can alter the cooking time and affect cooking quality.
N
P
GHFD68_IB_21799-English.indd 11 6/20/18 10:59 AM
To Next Page
Loading...
Need help?
General
