ghd Flight+ User Manual

65
EN
6. For fast drying, use the ghd ight+ without the styling nozzle.
7. Never cover the blower or intake opening.
8. Ensure that the air inlet lter is or does not become blocked with u or hair.
9. When drying or styling, do not allow any of your hair to cover or come into contact with the air inlet grill
at the back of your dryer.
appliance leakage current
Interrupter
Your appliance is equipped with an Appliance Leakage Current Interrupter (ALCI) protection device that may
make the appliance inoperable under some abnormal conditions (such as immersion of the appliance). To
ensure that the ALCI plug is functioning correctly the following test can be performed:
1. Plug in your appliance and press the yellow test button on the plug.
2. This will cause the appliance to stop working.
3. To reset the appliance press the red reset button.
Every time you use your appliance you should check that the ALCI protection device functions
correctly.
If the appliance does not function it must be discarded or returned to an approved ghd retailer, or you should
contact ghd North America LLC at 877-GHD-ANGEL (1-877-443-2643) for further instructions.
Figure 1
Dual voltage
selector
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
The ghd ight+ is equipped with a heat-sensitive safety cut out device. In the event of
overheating (for example if the rear grill is blocked or the incorrect voltage has been selected),
the heater will stop automatically and the dryer will continue to blow cold air. Isolate the dryer
from the mains supply and allow to cool before using again.
If your ghd ight+ has broken or does not work correctly immediately stop using and contact ghd
North America LLC, see contact details.
variable voltage
Your ghd ight+ is tted with a dual voltage selector (Fig.1). To use this
feature simply insert a coin to switch the ghd ight+ to accept the required
incoming voltage i.e. 120V or 240V.
For use in the USA or Canada, the voltage selector switch
should be placed in the 120 volt position. For use in several
countries overseas, the voltage selector may need to be placed
in the 240 volt position. Conrm the voltage available at each
overseas location before using the appliance. For connection to
a 240 volt supply, use an attachment plug adaptor of the proper
conguration for the power supply receptacle. If in doubt consult
a qualied person.
Your ghd ight+ should only be repaired using specialist tools and by qualied experts at ghd.
1. This product is intended for household use only.
2. This appliance has a polarized plug (one blade is wider than the other). As a safety feature,
this plug will t in a polarized outlet only one way. If the plug does not t fully in the outlet,
reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to
defeat this safety feature.
3. After washing your hair, towel-dry it thoroughly.
4. Do not allow excess water from your hair or any other source to come into contact with the
ghd hair dryer.
5. Use the selector switch, to set the fan speed and the drying temperature:
= Off = Cool = Medium = High
Do Not Reproduce
Do Not Reproduce

ghd Flight+ Specifications

General

Brand	ghd
Model	Flight+
Category	Hair Dryer
Language	English