English
5
Smart USB Backup Guide
WARNING
●
You can backup original recovery image through this application in case of losing by device damage.
●
You can backup original recovery image to USB Flash Drive and restore the system if any storage system
replacement with the recovery USB Flash Drive.
●
Before you restore the system through the recovery USB Flash Drive, please make sure that you have already
made the backup of your data.
●
Please DO NOT shut down or un-plug the system when performing backup through recovery USB Flash Drive.
1
>32G
•
Please plug in the USB Flash Drive which
is at least 32GB in capacity to make the
original image (backup the data in USB
first. All data will be eliminated during the
creation of recovery USB Flash Drive)
2
•
Insert the driver disk to your optical
drive and run the install of “Smart USB
Backup” (for none-ODD model,please
use external ODD device or download
from http://www.gigabyte.Com)
3
•
Run the “Smart USB Backup” after
finishing the install.
4
•
Select your USB Flash Drive from the
drop-down list and start to create the
recovery USB disk.
5
•
The window will pop out when the creation of recovery disk is done.
•
Please press F12 on starting the system when you need to restore the system.
Select “boot from recovery USB Flash Drive” and the system will be restored.
•
The time needed for restore will be around 30 mins(time needed may vary by USB disk
model).
To Next Page
Loading...
Need help?
General
