4
Installation
1
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Shut off the water supply.
□ Insert the faucet body through the hole in the
sink.
2
Securing the faucet assembly
□ From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (B). Push the FastMount™ system (B)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten.
Installing the faucet assembly
Sink
Push
up
Fig 1
B
11
Push
up
B
2
Sink
B
Sink
3
3
Continue to push up
and turn clockwise
to tighten
A
B
To Next Page
Loading...
Need help?
General
