4
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before removing an existing faucet or replacing any part of a faucet. Open the faucet handle
to relieve water pressure and ensure that the water is completely shut off.
1b
NOTE: This step is for escutcheon installation (optional).
□ Shut off the water supply. Remove the old faucet. Clean the mounting surface.
1a
□ Insert the faucet assembly (A) through the hole
in the sink.
NOTE: This step is for no escutcheon installation (optional).
□ Place the escutcheon (C) and the gasket (D) on
the bottom of the new faucet assembly (A).
□ Insert the faucet assembly (A) through the hole
in the escutcheon (C).
NOTE: A silicone is required under the gasket (D).
A
A
C
D
SILICONE
To Next Page
Loading...
Need help?
General
