Go Power GP-ISW-3000 User Manual

[page 40] | gpelectric.com
Electrical Specication Item
Model No.
GP-ISW4000-24
Input
Characteristics
Voltage 24VDC
Input Over Voltage Protection (1) 33 ± 0.5VDC
Input Under Voltage Protection 21 ± 0.5VDC
Voltage Range 21~33 VDC
No Load Current
≦2.0A @24VDC
Power Saving Mode <0.2A @24VDC
Output
Characteristics
Continuous Output Power 4000 VA (± 3%)
Maximum Output Power (1Min) > 4000 VA~4600 VA (100%~115%)
Surge Power (1Sec) < 8000 VA
Frequency 50 / 60 Hz ± 0.5% (Dip Switch Selectable)
Output Voltage
100 / 110 / 115 / 120 VAC (± 5%)
(Dip Switch Selectable)
E󰀩ciency Max. 91%
Short-Circuit Protection 1 Sec Shutdown
Output Waveform Pure Sine Wave (THD < 5%@ Normal Load) (2)
Signal and
Control
Remote Controller Panel Unit GP-SWR-A / GP-ISW-R (optional)
LED Indicator Red / Orange / Green LED
Dry Contact Terminal By a relay
Remote Control Terminal 6-port Green terminal (for inverter ON / OFF)
Protection
Input Protection Over / Under Voltage, Reverse Polarity (Internal Fuse)
AC Output Protection Short-Circuit, Overload
Others
Over / Under Temperature Protection
(by Heat Sink Temperature +80°C/-20°C)
Operating Temp. -20 °C~40 °C (3)
Storage Temp. -30 °C~70 °C
Storage Temp. & Humidity 10 ~95% RH
Safety & EMC
Safety Standards Certied UL 458 (6th Edition)
EMC Standards Certied FCC class A
Dimension(WxHxD) 255mm X 158mm X 462mm
Weight 10 KG
Cooling Temperature & Load Controlled Cooling Fan
SPECIFICATIONS
(1) Voltage Range. See Page 15
(2) Normal load Condition: Vin =12.5V/25V/50V,Vo=100/110/115/120 VAC 80% Full load (PF=1.0)
(3) Operating temperature. See Page 15

Go Power GP-ISW-3000 Specifications

General

Brand	Go Power
Model	GP-ISW-3000
Category	Inverter
Language	English