Go Power GP-PWM-30-SB User Manual

GP-PWM-30-SB
4
© 2019 Go Power!
1.4 Low Voltage Disconnect Function (USB Port)
To protect the battery against over-discharge this function automatically
switches off the USB output port when battery voltage is lower than 11.0
VDC. As soon as the battery reaches a voltage of 12.8 VDC the USB
output port is switched on again.
1.5 Regulatory Information
1.6 Specifications
Description
Value
Dimensions
(H x W x D):
149 x 98 x 32 mm
5.87 x 3.86 x 1.26 in
Weight: 260 g / 9.2 oz
Maximum Wire Gauge:
#4 AWG
Warranty: 5 years
• PWM Charging
• 4 Battery Charging
Profiles
• 4-Stage Charging
• Monthly Equalize
Option
• Displays Charging
Current, Battery
Voltage, Battery State
of Charge, and Amp
Hours Charged Since
Last Reset
• Reverse Polarity
Protected
Model
GP-PWM-30-SB
Nominal System Voltage 12 VDC
Range of Battery Input
Voltage
9.0 – 15.5 VDC
Maximum Solar Continuous
DC Charge Current Input
37.5 VDC
Charging Output DC Voltage
Range
9.0 – 14.9 VDC
Maximum Solar DC Input
Voltage
35 VDC
Maximum Series Fuse or
Circuit Breaker Solar/Battery
15 A
Operating Consumption
(Display backlight on)
15 mA
Operating Consumption
(Display backlight off)
6 mA
Battery Types Supported Vented and Sealed Lead Acid
(GEL, AGM, Flooded, Lithium
(LFP), etc.)

Go Power GP-PWM-30-SB Specifications

General

Brand	Go Power
Model	GP-PWM-30-SB
Category	Controller
Language	English