GP‐SF‐1.5
___________________________________________________________
4
5.0 Installation Requirements
1. LOCATION: Select a location for the SUNfilm that is in direct sun. If the unit
is placed in a shaded area it may greatly reduce power output.
2. MOUNTING – Mount the SUNfilm to any flat surface. Secure to the selected
location using fasteners or using self-adhesive Velcro strips (not provided). Do
not drill or alter the frame in any way, doing so will void the warranty.
3. CONNECTION – see section 4.1 for connection options.
4. IMPORTANT – Pulling the SUNfilm power cable may cause undo stress on
the junction box. The power cable should never support the weight of the
module.
6.0 Disclaimer of Liability & Warranty
Visit www.gpelectric.com for additional product warranty information.
Go Power!™ warrants the Go Power!™ SUNfilm for a period of one (1) year
against defects in materials and workmanship and five (5) years against a power
output less than 90% of the rated power output at STC. This warranty is not valid
against defects resulting from, but not limited to:
• Misuse and/or abuse, neglect, or accident
• Exceeding the unit’s design limits
• Improper installation, including, but not limited to, improper
environmental protection and improper hook-up
• Acts of God, including lightning, floods, earthquakes, fire and high
winds
• Damage in handling, including damage encountered during shipment or
installation
• Outdoor weather
6.1 Repair and Return Information
Visit www.gpelectric.com to read the “frequently asked questions” section of
our website to troubleshoot the problem. If trouble persists:
1. Call your Go Power!™ Technical Support team (1-866-247-6527).
2. Return defective product to place of purchase
________________________________________________________________
To Next Page
Loading...
Need help?
General
