9
Power Limit Solution for Grid-Tied PV Inverters User Manual V1.0-2022-09-15
3.2 Setting Power Limit Parameters via SolarGo App
• Inverters nished wiring and power on;
• Inverters connected with WiFi, LAN, 4G, GPRS, Bluetooth or Wi-Fi/LAN module, and in normal communication.
Preconditions
Operations
Notice
• All the UI gures in this document are based on SolarGo App V4.0.2. The UI may be dierent due to the version upgrading. The
data on the UI screenshots is for reference only.
• The method to set parameters is the same for all inverters. But the parameters displayedwill be dierent based on the inverter
model.
• Before setting any parameters, read through this document and the related inverter’s user manual to learn the product
functions and features. If the inverter parameters are set improperly, operations such as issuing start or stop griding command
to the inverter may fail or not in compliance with the related requirements, thus aecting the inverter’s power generation.
• For more details, refer to the SolarGo APP User Manual. Visit https://en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_
SolarGo_User%20Manual-EN.pdf or scan below QR to get the user manual.
Step 1 Download the APP.
Step 2 Log into the APP.
SolarGo App
User Manual
Method I Search SolarGo in Google Play
(Android) or App Store (iOS);
Method II Scan below QR.
play
App Store
SolarGo
SolarGo App
Notice
Type the original password to log in for the rst time. Modify the password as soon as possible and remember the new one. To
ensure a safe account, modify the password regularly.
3
• Initial password for Bluetooth/
WiFi: 1234
• Initial password for 4G:
automatically ll in
• Initial Password for GPRS: the
last 4 digits of Inverter bar code.
2
1
• When using WiFi, LAN, Bluetooth
modules, tap “WiFi&Bluetooth”
on the UI;
• When using GPRS or 4G module,
click “GPRS” on the UI.
4
• Bluetooth: SOL-BLE********
• WiFi: SOL-WiFi********
• The original password of WiFi:
12345678
• When using GPRS or 4G module,
scan the device’s QR.
• * refers to the last 8 digitals of
the inverter SN.