Goodwe GW10K-DT Installation Guide

TRACKSO INSTALLATION GUIDE FOR GOODWE INVERTER
Brand: GoodWe
Type: Solar On Grid String Inverter
Models: GW09K-DT, GW10K-DT, GW12K-DT, GW15K-DT, GW17K-DT, GW20K-DT, GW25K-DT
CONNECTION DIAGRAM
Figure D1 – GoodWe Sring Inverter Connections
Connection Steps:
1. Please unscrew the RS485 terminal as shown in Figure D1.
2. Please make the connections from the Terminal Block of Goodwe RS485
chipt to TrackSo IoT Gateway as mentioned in the Table – T1.
3. Please provide 12V external supply to TrackSo IoT Gateway via 12V, 2A DC
adaptor provided in the package.
4. The RS485 cables should be kept separate from the AC cable and the DC
cables to avoid interferences.
Note: Please insure to carry 2PIN/6PIN Terminal supplied with inverters.
Table T1 – GoodWe connections
with TrackSo IoT Gateway
GoodWe Pin
Assignment
TrackSo Pin
Assignment
1
RS485+
3
RS485+
2
RS485-
4
RS485-
3
NA
4
NA
5
RS485+
Used for
Daisy Chain
6
RS485-
The second pair (5/6) is used to connect multiple inverters via RS485.

Goodwe GW10K-DT Specifications

General

Brand	Goodwe
Model	GW10K-DT
Category	Inverter
Language	English