Goodwe GW10K-MS User Manual

30
08 System Commissioning
User Manual V1.1-2022-11-15
8.4 Setting Inverter Parameters via SolarGo App
8.3 Upgrading the Firmware Via USB Flash Disk
SolarGo app is a mobile application that communicates with the inverter via Bluetooth module,
WIFi module or GPRS module. Commonly used functions are as follows:
1. Check the operating data, software version, alarms, etc.
2. Set grid parameters, communication parameters, etc.
3. Equipment maintenance.
For more details, refer to the SolarGo APP User Manual. Scan the QR code or visit https://
en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_SolarGo_User%20Manual-EN.pdf to
get the user manual.
SolarGo App
SolarGo App User
Manual
Step 1 Contact the after-sales service to obtain the upgrade package.
Step 2 Save the upgrade package in the USB ash drive.
Step 3 Insert the USB ash drive into the USB port, and upgrade the software version of the
inverter following the prompts.
8.5 Monitoring via SEMS Portal
SEMS Portal is an monitoring platform used to manage organizations/users, add plants, and
monitor plant status.
For more details, refer to the SEMS Portal User Manual. Scan the QR code or visit https://
en.goodwe.com/Ftp/EN/Downloads/User%20Manual/GW_SEMS%20Portal-User%20Manual-EN.
pdf to get the user manual.
SEMS Portal User
Manual
SEMS Portal

Goodwe GW10K-MS Specifications

General

Brand	Goodwe
Model	GW10K-MS
Category	Inverter
Language	English