21
04 Check and StorageUser Manual V1.1-2022-12-20
Inverter x 1
Mounting plate
x 1
Expansion
bolts x N
Screw x N AC connector x N
Documents
x 1
Communication
terminal x 1
AC connector x 1
Communication
module x 1
or
Bluetooth
module x 1
Smart Meter
x 1
Battery
connectors x N
PV connectors x N
OT terminal
x1
4.3 Storage
If the equipment is not to be installed or used immediately, please ensure that the storage
environment meets the following requirements:
1. Do not unpack the outer package or throw the desiccant away.
2. Store the equipment in a clean place. Make sure the temperature and humidity are
appropriate and no condensation.
3. The height and direction of the stacking inverters should follow the instructions on the
packing box.
4. The inverters must be stacked with caution to prevent them from falling.
5. If the inverter has been long term stored, it should be checked by professionals before being
put into use.
To Next Page
Loading...
Need help?
General