EasyManua.ls Logo

Goodwe SDT G2 Series - Safety Precautions; General Disclaimer; Safety Disclaimer

Goodwe SDT G2 Series
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
01
01 Safety Precautions
General Disclaimer
• Theinformationinthisquickinstallationguideissubjecttochangeduetoproductupdates
orotherreasons.Thisguidecannotreplacetheproductlabelsorthesafetyprecautionsinthe
usermanualunlessotherwisespeci󽗉ed.Alldescriptionshereareforguidanceonly.
• Beforeinstallations,readthroughthequickinstallationguideandtheusermanualtolearn
abouttheproductandtheprecautions.
• Allinstallationsshouldbeperformedbyprofessionalandknowledgeabletechnicianswhoare
familiarwithlocalstandardsandsafetyregulations.
• Checkthedeliverablesforcorrectmodel,completecontents,andintactappearance.Contact
theafter-salesservicecenterifanydamageisfoundoranycomponentismissing.
• Useinsulatingtoolsandwearpersonalprotectiveequipmentwhenoperatingtheequipment
toensurepersonalsafety.Wearanti-staticgloves,clothes,andwriststripwhentouching
electrondevicestoprotecttheinverterfromdamage.
• Strictlyfollowtheinstallation,operation,andcon󽗉gurationinstructionsinthisguideanduser
manual.Themanufacturershallnotbeliableforequipmentdamageorpersonalinjuryifyou
donotfollowtheinstructions.Formorewarrantydetails,pleasevisithttp://www.goodwe.com.
DC Side
1. Ensurethecomponentframesandthebracketsystemaresecurelygrounded.
2. ConnecttheDCcablesusingthedeliveredDCconnectorsandterminals.Themanufacturer
shallnotbeliablefortheequipmentdamageifotherconnectorsorterminalsareused.
3. EnsuretheDCcablesareconnectedtightlyandsecurely.
4. MeasuretheDCcableusingthemultimetertoavoidreversepolarityconnection.Also,the
voltageshouldbeunderthepermissiblerange.
AC Side
1. Thevoltageandfrequencyattheconnectingpointshouldmeettheon-gridrequirements.
2. AnadditionalprotectivedevicelikethecircuitbreakerorfuseisrecommendedontheAC
side.Speci󽗉cationoftheprotectivedeviceshouldbeatleast1.25timestheACoutput
ratedcurrent.
3. PEcableoftheinvertermustbeconnected󽗉rmly.Theresistancebetweentheneutralwire
andtheearthcableislessthan10Ω.
4. YouarerecommendedtousecoppercablesasACoutputcables.Contactthe
manufacturerifyouwanttousealuminumcables.
Inverter Side
1. Terminalsatthebottomoftheinvertercannotbearmuchload.Otherwise,theterminals
willbedamaged.
2. Alllabelsandwarningmarksshouldbeclearaftertheinstallation.Donotscrawl,damage,
orcoveranylabelonthedevice.
3. Warninglabelsontheinverterareasfollows.
Safety Disclaimer
Warning

Other manuals for Goodwe SDT G2 Series

Related product manuals