Scooter Console Funtions
On/OFF machine: Long press 3 seconds the power button to turn on/o,
the buzzer will “di” sound, and the scooter will shut down automatically
after 5 minutes without any oration.
Light: Press the power button twice continuously to turn on and o the
headlights and taillights (taillights are slightly bright), the taillights are
highly bright when braking, and the atmosphere lights are automatically lit
when starting (breathing light).
Process unit display switch: press the power button three times.
Fixed cruise: Keep the throttle at the same speed for 8-10 seconds, the
buzzer will emit a "di" sound, and the fixed cruise icon will light up at the
same times to enter the fixed cruise mode. You can exit the cruise mode by
twisting the throttle, brake or changing gears again.
Password lock function:
1. After starting up the scooter, press the throttle once and reset it to increase
the password figure, braking the brake handlebar once and reset it to
decrease the password figure, click the power button to switch the password
number, double-click the power button to confirm that the password input is
complete, the standard password is 000.
Shift gears: Press the power button to change gears. The speed is 0-3 MPH
in pedestrian mode in 1st gear ( ), 0-15.5 MPH in icon speed in 2nd gear
(D), and 0-20 MPH in icon speed in 3rd gear (S).
10
To Next Page
Loading...
Need help?
General
