Instructions - Parts
XM PFP Mix Manifold
Dual flush, center inject manifold with heated water circulating base for mixing
intumescent epoxies with the XM PFP system. For professional use only.
Part No. 262893
6000 psi (41 MPa, 414 bar) Maximum Working Pressure for A and B materials
4500 psi (31 MPa, 310 bar) Maximum Working Pressure for flushing fluid
100 psi (0.7 MPa, 7 bar) Maximum Working Pressure for heating fluid
180°F (82°C) Maximum Fluid Temperature
Important Safety Instructions
Read all warnings and instructions in this manual
and XM PFP Operation manual. Save all instruc-
tions.
ti20088a
3A2988C
EN
II2GExhT5Gb
To Next Page
Need help?
General
