SUB Universal, SBB boiling, JB and PB unstirred water baths
Part No. 15133/Issue 14 Page 3 January 2010
CONTENTS
1 Safety 4
2 Assembly 5
2.1 Unpacking 5
2.2 Installation 5
2.2.1 SUB baths 5
2.2.1.1 Adjustable over temperature cut-out 5
2.2.2 SBB baths 5
2.2.2.1 Constant level device 5
2.2.3 JB baths 5
2.2.4 PB baths 6
3 Operation 6
3.1 SUB Baths 6
3.1.1 Controls and indicator lamps 6
3.1.2 Setting the temperature 6
3.1.3 Setting the over temperature cut-out 6
3.1.4 Resetting the over temperature cut-out 6
3.2 SBB Baths 8
3.2.1 Controls and indicator lamps 8
3.2.2 Over temperature protection 8
3.3 JB Baths
3.3.1 Controls and indicator lamps 8
3.3.2 Over temperature protection 8
3.4 PB1
3.4.1 Controls and indicator lamp 8
3.4.2 Over temperature protection 8
4 Accessories 9
4.1 Individual racks for test tubes and universal bottles 9
4.2 Lid and covers 9
4.2.1 Gabled lids 9
4.2.2 Flat lids with holes 10
4.3 Polypropylene spheres 10
4.4 Raised shelves for SUB baths 10
4.5 Syphon SY1 10
5 Fault diagnosis 11
6 Technical specification 12
6.1 SUB baths 12
6.2 SBB baths 12
6.3 JB baths 12
6.4 PB1 baths 13
7 Maintenance and service 13
7.1 Cleaning 13
7.2 Replacement of Fuses 13
7.2.1 SUB, PB1 and SBB 13
7.2.2 JB baths 14
7.3 Resetting the over temperature cut-out on JB2, JB4 and JB5 baths 14
7.4 Resetting the over temperature cut-out on PB1 baths 14
8 Guarantee 14
9 Service 14