GENERAL
Gree packaged terminal air conditioners and heat pumps provide a high standard of quality
in performance, workmanship, durability and appearance as they heat and cool the occupied
air space year round. This manual provides information for ease of installation, operation and
maintenance. All models are designed for through-the-wall installation. Separate installation
instructions are included with all accessory components.
BEFORE YOU BEGIN: Read these instructions completely and carefully.
IMPORTANT: Save these instructions for local inspector’s use.
IMPORTANT: Observe all governing codes and ordinances.
NOTE TO INSTALLER: Be sure to leave these instructions with the owner.
NOTE TO OWNER: Keep these instructions for future reference. Be sure to write down the
model and serial number of unit on the space provided on the front page. The model and serial
number can be located on the serial number plate attached to unit.
UNIT INFORMATION
NOMENCLATURE
noitcetorPlatnemnorivnE
noitangiseDseireS
noitcetorPdradnatS-A
PTAC
ETAC
ETAC2
CP - Sea Coast Protection
Revision Level
Cooling Capacity
07 - 7,000 BTUH
HUTB000,9-90
HUTB000,21-21
HUTB000,51-51
gnitaRlacirtcelEepyTledoM
HP1zH06V032/802-V032pmuPtaeH-PH
HP1zH06V562-V562looC/taeH-CH
ETAC2
12 HP 230V -AA
Example: ETAC2-12HP230VA-A
Fig. 1 – Unit Name Plate & Nomenclature Chart
32
The unit nameplate is located beneath the front panel on the front lip of the base pan.
The nameplate contains the model and serial numbers of the unit. It also contains important
electrical and operational specifications. See Fig. 1.
ETAC2-12HP230VA-A
13516GAOO123
To Next Page
Loading...
Need help?
General
