Gree FGR25Pd/DNa-X User Manual

Ducted Type Split Air-Conditioner Units(Inverter Series)
29
Problems
Causes
What to do
Unit doesn’t work.
Fuse or circuit breaker is cut off.
Replace fuse or reset
the circuit breaker.
Power failure.
Restart unit when
power is restored.
Power is not connected.
Connect the power.
Remote controller’s power is not
enough.
Replace new battery.
Remote controller is out of the
control range.
Control range is within
8m.
Unit runs but stops
immediately.
Air inlet or air outlet of indoor and
outdoor units is blocked.
Clear obstructions.
Abnormal cooling
or heating
Air inlet or air outlet of indoor and
outdoor units is blocked.
Clear obstructions.
Improper temp setting.
Adjust setting at remote
controller or wired
controller.
Fan speed is set too low.
Adjust setting at remote
controller or wired
controller.
Wind direction is not correct.
Adjust setting at remote
controller or wired
controller.
Door or window is open.
Close the door or
window.
Direct sunshine.
Draw curtain or louver.
Too many people in the room.
Too many heat resources in the
room.
Reduce heat
resources.
Filter is blocked and dirty. Clean the filter.
NOTES!
If problem cannot be solved after checking the above items, please contact
Gree service center and describe the cases and models.

Gree FGR25Pd/DNa-X Specifications

General

Brand	Gree
Model	FGR25Pd/DNa-X
Category	Air Conditioner
Language	English