12
COOL
Mode
ENERGY
SAVER
Mode
DRY Mode
AUTO Mode
FAN Mode
Display
Filter
Check
Button
Function
Button
(+) Button(-) Button
Power
Button
NOTE: On the remote control, use the fan speed Increase + /
Decrease – pads to set the fan speeds to Low, Med or High.
Use the Auto pad to turn Auto fan on.
Display Control
SYMBOL DESCRIPTION FUNCTION
Power
Turns air conditioner On and Off.
Display
Shows the room temperature or time remaining on the Delay Timer. Shows the room
Temperature while setting the temperature in COOL, DRY or ENERGY SAVER modes.
Increase /
Decrease
Use to set temperature when in COOL and FAN SPEED mode. Pressing (+) or (-) button
once will increase or decrease set temperature by 1°.
Function
From any Mode use to set the air conditioner to Cool Mode and select Fan Speed
Cool
Mode
Air conditioner operates under cooling mode. Cooling indicator will be on.
Press (+) (-) button to adjust the fan speed
Fan
Speed
Press (+) (-) button to adjust the fan speed (Available in COOL mode only)
OPERATING INSTRUCTIONS
Function & Control Display
To Next Page
Loading...
Need help?
General
