DC Inverter U-match Series Duct Type Unit
30
7 Unit Function
7.1 Setting of Double Indoor Room Sensors
This series of ducted air-conditioning unit has two indoor room sensors. One is located at the
air intake of the indoor unit and the other one is located inside the wire controller.
User can select one from the two indoor room sensors on the basis of the engineering
requirement.
(Refer to the section of wire controller instructions for detailed operation.)
Indoor room sensor A
Indoor room sensor B
Fig.48
7.2 Checking of Outdoor Ambient Temperature
The outdoor ambient temperature can be checked on the wire controller for the convenience of
users before going out. (Refer to the section of wire controller instructions for detailed operation.)
Outdoor unit
Indoor unit
Outdoor room sensor
Fig.49
To Next Page
Loading...
Need help?
General
