1
A IR CO NDITIO NER SA FETY
Y ou can be killed or s erious ly injured if you don't
immediately follow ins tructions .
Y ou
can be killed or s erious ly injured if you don't
follow ins tructions .
All safety mes s ages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can
happen if the instructions are not followed.
Y our s afety and the s afety of others are very important.
We have provided many important s afety messages in this manual and on your appliance. Always read and obey all
safety mes s ages .
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety mes s ages will follow the safety alert symbol and either the word “DANG E R ” or
“W AR NING .” T hese words mean:
IMP OR TANT S AF E TY INS TR UC TIONS
WAR NING :
To reduce the risk of fire, electrical shock or injury when us ing your air conditioner, follow these basic precautions :
S AVE THE S E INS T R UC TIONS
Unplug air conditioner before s ervicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not us e an extens ion cord.
Electrical Requirements
The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located behind the front panel above the coil area.
Specific electrical requirements are listed in the chart below.
Follow the requirements for the type of plug on the power supply
cord.
Power supply cord Wiring requirements
■ 115 volt (103.5 min. -
126.5 max.)
■ 0-12 amps
■ 15-amp time-delay fuse or
circuit breaker
■ Use on single outlet circuit
only.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.