Gree GMV-280WM/E-X User Manual (English)

Other manuals for Gree GMV-280WM/E-X

Questions and Answers:

E
elizabethdillonJul 25, 2025
What to do if my Gree GMV-280WM/E-X Air Conditioner has communication failure between indoor and ODUs and IDU's communicator?
- R
  Robert AdamsJul 25, 2025
  If there is a communication failure between the indoor and outdoor units (ODUs) and the indoor unit's (IDU) communicator, check the network between the IDU and communicator. Also, if the communicator is disconnected, check the network between the IDUs and ODUs and between the IDU and communicator. Check if the cables connecting the control board of the ODU and the IDU and connecting the IDU and communicator are loose and reconnect them if needed. Alternatively, the communicator controller may be faulty, requiring replacement of the control board.
J
Jeremy LunaJul 29, 2025
What to do if my Gree GMV-280WM/E-X has communication failure between main control board and inverter compressor drive?
- C
  Christy MontgomeryJul 29, 2025
  If there is a communication failure between the main control board and the inverter compressor drive, check if the cable connecting the control board and the compressor's drive board is loose and reconnect it if necessary. Also, check if the cable connecting the control board and compressor's drive board is broken and replace it if needed. Check the contact of the communication cable connecting the control board and compressor's drive board. If the communicator is faulty, replace the control board.
D
Denise MillerAug 2, 2025
Why does my Gree GMV-280WM/E-X Air Conditioner show power phase sequence protection?
- J
  John CruzAug 2, 2025
  Power phase sequence protection can occur if the three-phase power cable is not connected correctly. Check the connection of the power cable. Alternatively, the control board may need to be replaced.
R
Robert BlakeAug 7, 2025
What to do if my Gree Air Conditioner has faults in the constant frequency compressor's current sensor?
- C
  christine28Aug 7, 2025
  If there are faults in the constant frequency compressor's current sensor and the compressor is not starting, check if the AC contact is closed. If not, replace the AC contact. If the connection is loose, reconnect it. Also, consider replacing the current detection board or the main board.
D
Daniel SantiagoAug 11, 2025
How to fix wrong outdoor capacity code setting on my Gree GMV-280WM/E-X Air Conditioner?
- M
  Megan PattersonAug 11, 2025
  If the outdoor capacity code setting is wrong because the capacity code is incorrect, modify the capacity code setting. Alternatively, the main board may need to be replaced.
S
Suzanne SalazarAug 16, 2025
What to do if my Gree GMV-280WM/E-X Air Conditioner has faults in the ODU's main board?
- D
  Daniel HernandezAug 16, 2025
  If there are faults in the ODU's main board, such as memory and address chip exceptions, replace the small CPU board. You may also need to replace the control board.