• Low • Medium • High
5
OPERATION OF WIRELESS REMOTE CONTROLLER
REMOTE CONTROLLER OPERATIONS
The
neo
universal wireless remote controller is sleek, versatile and allows you to change
room temperatures and functions on unit from the palm of your hand. The large LCD
display and buttons make it easy-to-understand and easy-to-use.
The remote controller may be used for several
neo
units. It can operate the unit from a distance
of up to 25 ft. (7.6 m) as long as there are no obstructions. This is one-way communication only
(from remote controller to indoor unit.)
The remote controller is set from factory to display temperatures in°F. If °C is desired, turn
the remote OFF and then press “MODE“ and “
––
” buttons on the remote simultaneously.
NOTE: Not every unit has each of the functions described below. If your unit does
not come equipped with a certain function, the button will be inactive.
ON/OFF Button
•
Pressing this button will turn the unit on and off. Using the
ON/OFF function will cancel TIMER and SLEEP functions,
but preset times will not be affected.
MODE Button
• Pressing this button will present the AUTO, COOL, DRY,
FAN and HEAT mode options which can then be selected.
AUTO mode is the default mode. When the indoor unit
first powers on under this mode, the temperature will not
be displayed.
FAN Button
• Pressing this button will present the AUTO, LOW, MEDIUM,
and HIGH speed options
which can then be selected.
NOTE: When the indoor unit first powers on, the AUTO fan speed is the default mode.
In DRY MODE, the fan will automatically run at low speed.
• Do not drop or throw remote controller.
• Protect remote controller from water
• Keep remote controller away from direct sunlight or high heat.
: AUTO
: COOL
: DRY
:
FAN ONLY
: HEAT
Icons Displayed
To Next Page
Loading...
Need help?
General
