Air-to-water Heat Pump Split Versati
20
7.3 Installation process of indoor unit
Step1:Drilling hole on the wall in the following draw.
Wall
Wall
Step2:Install expansion bolts and forecasted pannel.
Wall
Wall
Support
Expansion
bolt X3
Step3: Attaching indoor unit to the wall.
Wall Thermal baffle
NOTE
Note
• While lifting the indoor unit, at least two persons should be joined. Weight of the indoor unit is more than 50kg.
• The indoor unit must be installed vertically to the ground and fastened securely.
• Before commissioning, the dust-proof cap of the automatic relief valve must be loosened, other than entirely being
removed away, and it can be tightened in case that it leaks.
To Next Page
Loading...
Need help?
General