VIREO GEN3 OWNERS MANUAL - INDOOR UNIT | 17
WIFI SETUP
To set up a Wi-Fi connection with the Vireo Gen3 high
wall, please follow these steps:
1. Download and install the Gree+ app from the Apple
App Store or the Google Play Store.
2. Launch the Gree+ app by clicking on the Gree+ app
icon on your phone.
3. Log into the Gree+ app using your login ID and
password. First-time users will need to click the “Sign
Up” button and follow the on-screen instructions to
create an account.
4. Activate Wi-Fi pairing mode by using the remote
control. Press and hold the Wi-Fi button until the Wi-
Fi icon appears on the screen of the remote control.
This should be accompanied by an audible beep. The
unit will remain in Wi-Fi pairing mode for 2 minutes.
If pairing is not completed within two minutes, use
the remote to turn the unit off, then press and hold
the Mode and Wi-Fi buttons at the same time until
an audible beep is heard. This will reset the Wi-Fi
module.
5. Once Wi-Fi pairing mode is active, click on the “+”
sign located at the top right-hand corner of the Gree+
app home screen.
6. The app will automatically search for the active Wi-
Fi signal from the high wall unit. If the app does not
automatically detect the unit, select the AC icon from
the list of product boxes and follow the on-screen
prompts to manually add the unit.
7. Follow the on-screen prompts to connect the unit.
After pairing the unit with the app, you will be
prompted for the Wi-Fi network to be used with the
unit. Select the proper Wi-Fi network ID and enter
the network password. Please note the unit is not
compatible with 5 GHz networks.
To Next Page
Loading...
Need help?
General