17
MAINTENANCE
W A R N I N G
etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which
may result in serious personal injury.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, lubricant, grease, etc.
you can often make adjustments and repairs described here. For other repairs, have the power
head serviced by an authorized service dealer.
CLEANING THE POWER HEAD
• Stop the motor and disconnect from power supply.
• Clean dirt and debris from the power head using a damp cloth with a mild detergent.
W A R N I N G
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
W A R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with
hearing protection. Head protection may also be required depending on the type of attachment
used and as prescribed in the attachment’s Operator’s Manual. Failure to do so could result in
objects being thrown into your eyes and other possible serious injuries.
W A R N I N G
Before inspecting, cleaning, or servicing the machine, shut off motor, wait for all moving parts
to stop, and disconnect extension cord. Failure to follow these instructions can result in serious
personal injury or property damage.
To Next Page
Loading...
Need help?
General
