GreenWorks 25147 User Manual

19
English (Original Instructions)
TROUBLESHOOTING
Problem Possible cause Solution
Motor refuses to start
Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if damaged
Fuse faulty/blown Replace fuse
Grass too long
Increase height of cut and tilt garden
product to reduce starting load
Motor protector has activated
Allow motor to cool and increase
height of cut
Garden product functions
intermittently
Extension cable damaged Inspect cable, replace if damaged
Internal wiring of garden product
damaged
Contact Service Agent
Motor protector has activated
Allow motor to cool and increase
height of cut
Garden product leaves ragged nish
and/or Motor labours
Height of cut too low Increase height of cut
Cutting blade blunt Replace the blade
Possible clogging
Check underneath the garden
product and clear out as necessary
(always wear gardening gloves)
Blade fitted upside down Refit blade correctly
Blade not rotating while garden
product switched on
Cutting blade obstructed
Switch off garden product Clear
obstruction (always wear gardening
gloves)
Blade nut/bolt loose Tighten blade nut/bolt
Excessive vibrations/noise
Blade nut/bolt loose Tighten blade nut/bolt
Cutting blade damaged Replace the blade
If these solutions do not solve the problem contact your authorised service dealer.

GreenWorks 25147 Specifications

General

Brand	GreenWorks
Model	25147
Category	Lawn Mower
Language	English