Operating Mode Description
Standby mode /Power
saving mode
Note:
*Standby mode: The
inverter is not turned on yet
but at this time, the inverter
can charge battery without
AC output.
No output is supplied by PV
still can charge batteries.
When utility grid connected, no charging;
PV can charge
Priority for utility drive the
loading solar priority
charging
The unit will provide output
power from the mains. It
will also charge the battery
at line mode.
The unit will provide output
power from battery and PV
power.
Power from battery and PV energy.
To Next Page
Loading...
Need help?
General