English (GB)
2
English (GB) Installation and operating instructions
Original installation and operating instructions
These installation and operating instructions describe the SA-CSIR, SA-
CSCR control box.
Sections 1-3 give the information necessary to be able to unpack, install and
start up the product in a safe way.
Sections 4-8 give important information about the product, as well as
information on service, fault finding and disposal of the product.
CONTENTS
Page
1. General information
3
1.1 Target group
3
1.2 Symbols used in this document
3
2. Receiving the product
4
3. Installing the product
4
3.1 Location
5
3.2 Mechanical installation
5
3.3 Electrical connection
5
4. Product introduction
10
4.1 Approvals and marks
10
5. Servicing the product
10
6. Fault finding the product
11
7. Technical data
13
8. Disposing of the product
13
Prior to installation, read this document. Installation and operation
must comply with local regulations and accepted codes of good
practice.