6.1 Intended use
The Grundfos UNILIFT AP pump is a single-stage
submersible pump designed for pumping wastewater.
The pump is capable of pumping water which
contains a limited quantity of solids, however not
stones and similar materials, without being blocked or
damaged.
The pump is available for automatic as well as
manual operation and can be installed in a permanent
installation or used as a portable pump.
Applications
AP12
AP35
AP50
Drainage of flooded cellars or build-
ings
● ● ●
Groundwater lowering ● ● ●
Pumping of water from drain water
collecting pits
● ● ●
Pumping of water from surface wa-
ter pits with inflow from roof gutters,
shafts, tunnels, etc.
● ● ●
Emptying and filling of swimming
pools, ponds, pits, etc.
● ● ●
Pumping of fibre-containing waste-
water from laundries and light in-
dustries
● ●
Pumping of domestic wastewater
from septic tanks and sludge treat-
ing systems
● ●
Pumping of domestic wastewater
without discharge from water clos-
ets
● ●
Incorrect application of the pump, for example
resulting in blocking of the pump, and wear are not
covered by the warranty.
6.2
Pumped liquids
The pump is capable of pumping water containing a
limited quantity of spherical particles. Pumping of
spherical particles exceeding the maximum particle
size for the pump may block or damage the pump.
Maximum particle size: See section Technical data.
The pump is not suitable for these liquids:
• sewage
• liquids containing long fibres
• flammable liquids (oil, petrol, etc.)
• aggressive liquids
• liquids containing solids exceeding the pump's
recommended maximum particle size.
Related information
9.1 Storage temperature
6.3 Identification
6.3.1 Nameplate
MADE IN HUNGARY
DK-8850 Bjerringbro, Denmark
P3 0000
Type: UNILIFT XXXX.XX.XX.XX X
Prod. No: XXXXXXXX
U: XxXXX V
Class: F
Imax: X,XX A
P1: X,X kW
Qmax: XX m
3
/h
Tmax: XX°C
Cosφ: X,XX
IP 68
N.wght: XX.X kg
n: XXXX min
-1
Hmax: XX m
: XX m
XXXXXXXX
XX XXXXX-X
XXXXXXXX
~XX Hz± XX %
1
2
3
4
5
6
7
8
9
10
11
12 13
15
14
1820
16
17
19
21
22
TM074469
Nameplate example
Pos. Description
1 Product type
2 Product number
3 Supply voltage [V]
4 Power input [kW]
5 Max. current [A]
6
Max. flow rate [m
3
/h]
7 Max. head [m]
8 Factory code
9 Production code (year and week)
10 Insulation class
11 Voltage tolerance [%]
12 Frequency [Hz]
13 Enclosure class
14 Max. liquid temperature [°C]
15
Speed [min
-1
]
16 Cosinus phi
17 Net weight [kg]
18 Max. installation depth [m]
19 ID number for Safety Instruction
20 ID number for EN standards
21 Nameplate layout
22 Approvals
11
English (GB)
To Next Page
Loading...
Need help?
General
