5
Lock operation
Add/Change access data
How to change master PIN code
1. Before changing default master PIN code, all other setting menu will be disabled. You have to change master PIN code
first, then do other lock settings.
(6 –12 digits)
(6 –12 digits)
(6 –12 digits)
(6 –12 digits)
(confirm)
(confirm)
How to add user PIN codes
1. When registering user PIN codes, the code must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “
*
” key.
How to add ngerprints
1. When registering user fingerprint, the fingerprint must be entered within 10 seconds.
2. At any time you can return to the previous menu by pressing the “
*
” key.
User Number User Type Notes
00- 04 Normal User * Permanent
05- 08 Temporary User * Invalid after using one time or in safety mode
09 Reserved * Only used in combination with network Module expansion
User Number User Type Notes
00- 94 Normal User * Permanent
95-99 Reserved * Only used in combination with network Module expansion
(first setting use
12345678)
(first time setting)
To Next Page
Loading...
Need help?
General
