Fan Operation
2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select FAN operation
3.Fan speed selection
4.Unit stop
About FAN operation
In FAN operation mode, the unit will not operate in
COOL mode but only in FAN mode ,AUTO is
not
available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP operation is
not available.
Press ON/OFF button, the unit stops.
AUTO
LOW
MED
HI
COOL DRY FAN
Operation
1. Unit start
Press ON/OFF on the remote controller, unit starts.
Remote controller
POWER/SOFT
FRESH
Display board
To Next Page
Loading...
Need help?
General
