Operation
POWER
SOFT
BLANK
Stop the display at
Stop the display at
POWER
SOFT
BLANK
POWER/SOFT Operation
SOFT Operation
You can use this function when silence is needed for rest
or reading.
In COOL mode, compressor runs in high frequency
for 15 min then returns to original status setting.
In POWER operation status:
Hints:
During POWER operation, in rapid COOL mode, the room
will show inhomogeneous temperature distribution.
Long period SOFT operation will cause effect of not too cool.
Remote controller
Selecting of POWER operation
POWER Operation
When you need rapid cooling, you can use this function.
Press POWER/SOFT button twice ,POWER/SOFT disappears.
To cancel SOFT operation
Press POWER/SOFT button. Every time the button is pressed,
display changes as follows:
Selecting of SOFT operation
In SOFT operation mode, fan speed automatically takes"ultra-low"
Press POWER/SOFT button. Every time the button is pressed,
display changes as follows:
Press POWER/SOFT button twice ,POWER/SOFT disappears.
To cancel POWER operation
FRESH
To Next Page
Loading...
Need help?
General
