EasyManuals Logo
Home>Haier>Air Conditioner>1U09TE2VHA

Haier 1U09TE2VHA User Manual

Haier 1U09TE2VHA
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 49-7835 Rev. 8
ENGLISH
FOR MORE HELP, VISIT HAIERAPPLIANCES.COM OR CALL THE CONSUMER HELP LINE AT 877-337-3639.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT – Save these instructions for
local inspector’s use.
IMPORTANT – Observe all governing
codes and ordinances.
Note to installer – Be sure to leave these instructions
with the Consumer.
Note to consumer – Keep these instructions for future
reference.
Skill level – A licensed certified technician (to handle
refrigerant R-410A, recovery, etc) and a qualified
electrician are required for installation and service of
this split heat pump system.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the limited warranty.
For personal safety, this system must be properly
grounded.
Protective devices (fuses or circuit breakers)
acceptable for installation are specified on the
nameplate of each unit.
Make sure to minimize wiring or plumbing inside the
wall when installing.
CAUTION
Aluminum building wiring may present special
problems - consult a qualified electrician.
When the unit is in the STOP position, there is still
voltage to the electrical controls.
INSTALLATION INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier 1U09TE2VHA and is the answer not in the manual?

Haier 1U09TE2VHA Specifications

General IconGeneral
BrandHaier
Model1U09TE2VHA
CategoryAir Conditioner
LanguageEnglish

Related product manuals