Haier 3000 Series User Manual

English
5
1. Remove 7” Round Duct Plate from top of hood. Set duct plate aside - with
mounting screws.
2. Remove tape holding filters in place. Pull down on filter tabs and lift filters out.
Set filters aside.
3. Remove bottom cover from hood. Set cover and mounting screws aside.
Bottom Cover
(Held in place with 2 screws)
Filters
7” Round Duct Plate
Preparing Hood

Haier 3000 Series Specifications

General

Brand	Haier
Model	3000 Series
Category	Ventilation Hood
Language	English