ON/OFF Operation:
Use this operation only when the remote controller is
defective or lost, and with function of emergency running,
air conditoner can run automatically for a while.
When the emergency operation switch is pressed, the
“Pi” sound is heard once, which means the start of this
operation.
emergency operation starts, the unit will run automatically in
the following modes:
Room
Designated
T
mode
Fan
speed
Operation
mode
Above 24 ºC
ºC No AUTO COOL
Below 24 ºC
ºC No AUTO
It is impossible to change the settings of temp. and fan
speed, It is also not possible to operate in timer or dry mode.
T
est operation switch is the same as emergency switch.
Use this switch in the test operation
when the room temperature is below
16 ºC, do not use it in the normal
operation.
Continue to press the test operation
switch for more than 5 seconds.
After you hear the “Pi” sound twice,
ON/OFF operation and test operation
Pi
Pi Pi
9
When indoor fan motor is running, it has healthy
process function. (It’s available under any mode)
When the fan in the indoor unit does not work, the
health lamp lights up, but the anion generator does
not release anion.
HEALTH Operation
The water-ion generator in the
airconditioner can generate a lot
quantity of position and anion in
the air and also to kill bacteria
and speed up the dust sediment
air in the room.
button
Press HEAL
TH button for twice press,
disappears, the operation stops.
For each press, is displayed
Air conditioner starts health anion
Loading of the battery
Remove the battery cover;
1
Load the batteries as illustrated. 2 R-03 batteries,
resetting key (cylinder); Be sure that the loading is
in line with the “+”/“-”;
, then put on the cover again.
2
3
(This function is unavailable on
some models)
TIMER
10
SMART
To Next Page
Loading...
Need help?
General
