EasyManuals Logo
Home>Haier>Heat Pump>AW09LC2VHB

Haier AW09LC2VHB User Manual

Haier AW09LC2VHB
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
CONTROLLER FEATURES & SETTINGS PAGE 5
ENGLISH
Emergency Operation:
Ţ Use this operation only when the remote control is defec-
tive or lost.
Ţ When the emergency operation switch is pressed, the unit
beeps once, which indicates the start of this operation.
Ţ When the power switch is turned on for the ƪrst time and
emergency operation starts, the unit will run automatically
in the following modes:
Ţ During emergency operation, it is not possible to change
the settings of temperature and fan speed. It is also not
possible to operate in timer or dry modes.
Beep
emergency
operation switch
Room
temperature
Designated
temperature
Timer
mode
Fan
speed
Operation
mode
Above 73
o
F
Below 73
o
F 73
o
F
79
o
F
No
AUTO
AUTO
COOL
HEAT
No
1. Remove the battery cover
2. Insert 2 AAA batteries as
illustrated noting battery polarity
3. Reinstall the battery cover
NOTE:
Ţ The distance from the remote
control to the receiver should
be less than 23 feet with no
obstructions.
Ţ If the remote control display is weak or the operating
distance has diminished, the batteries may need to be
replaced.
Ţ Remote control malfunctions can sometimes be corrected
by removing the batteries from the remote for a few min-
utes and then reinstalling them.
Ţ Remove the batteries from the remote control if the unit
will not be in use for an e[tended period of time. If any seg-
ments of the display remain active after battery removal,
press the reset button.
Do not block the air inlet
or outlet
Close doors and windows
during operation
Wipe the air conditioner using a soft and
dry cloth. For serious stains, use a neutral
detergent diluted with water. Wring the water
out of the cloth before wiping down the unit.
Then wipe oƩ the detergent completely.
During cooling operation
prevent direct sunlight
with curtains or blinds
1. Open the inlet grille by pulling
it upward
2. Remove the ƪlter.
*HQWO\SXVKXSRQWKHłOWHUVFHQWHU
WDEXQWLOLWLVUHOHDVHGIURPWKH
VWRSSHUDQGUHPRYHWKHłOWHU
downward.
3. Clean the ƪlter.
Use a vacuum cleaner to remove
GXVWRUZDVKWKHłOWHUZLWKZDWHU
$IWHUZDVKLQJGU\WKHłOWHU
completely.
4. Attach the ƪlter
$WWDFKWKHłOWHUVRWKDWWKH)5217
ODEHOLVIDFLQJWKHIURQW0DNHVXUH
WKDWWKHłOWHULVVHFXUHO\DWWDFKHG
EHKLQGWKHKROGLQJWDEV,IWKHłOWHULV
not attached correctly the unit may
QRWDFKLHYHPD[LPXPHƧFLHQF\
5. Close the inlet grille.
Once every
two months
EMERGENCY OPERATION & MAINTENANCE
Inserting the Batteries
Emergency Operation
Optimizing Performance
Cleaning the Air Filter
15
HEALTH Button
Feature not available on this series.
16
&RQƪUP&DQFHO%XWWRQ
Function: Setting and canceling timer and other functions.
17
LOCK Button
Used to lock buttons and LCD display
18
LIGHT Button
Turns indoor unit display on and oƩ
19
RESET Button
If the remote control is not functioning properly, use a pen
point or similar object to depress this button to reset the
remote.

Other manuals for Haier AW09LC2VHB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier AW09LC2VHB and is the answer not in the manual?

Haier AW09LC2VHB Specifications

General IconGeneral
BrandHaier
ModelAW09LC2VHB
CategoryHeat Pump
LanguageEnglish

Related product manuals