48
1.Water pressure and Temperature
Water pressure: 20-150 psig, 100 psig is recommended.
Water Temperature:15-32, 25℃ is recommended.
2.Connections
Inlet 0.5” compression
Outlet 0.5” compression
3.Water Flow Rate Required(per minute)
1.0 gal.(3.8L)
4.Water PH value
6-9
5.Installation requires a qualifi ed technician
The customer should dispose of a centralized water cooling system when using this feature!
*Actual requirements may vary due to specifi c water pressure conditions.
DW-86L959W/828W Technical Data
Water fl ow
regulator
Resettable
pressure
switch
Brazed Plate
exchanger
(water-cooled
condenser)
(Front View) (Left View) (Back View)
Water Filter Water Outlet Water Inlet
1
Dear Haier Customers,
Thank you for purchasing a Haier ULT freezer. Please read this manual carefully to avoid injuries
to personnel and damage to the product. Please also follow descriptions marked with the following
labels.
Ignoring this warning may result in
death or serious injury
Actions or operations
which are prohibited
Actions or operations
which must be followed
Ignoring this warning may result in
death or serious injury,and/or damage
to the freezer and property
Safety Labels and Safety Precautions
Safety labels
Safety precautions
Symbol for
“Manufacture”
Install padlock here for best security
Wear cryo-gloves to prevent frostbite
Elscolab BV.
Tolboomweg 10, 3784 XC Terschuur,
the Netherlands
Flammable material
To Next Page
Loading...
Need help?
General
