Haier GE APPLIANCES AUH4860ZGDA User Manual

CONNECT SERIES SERVICE MANUAL
52
ENGLISH
Maintenance
Compressor/Gas Liquid Separator Removal
Note: Make sure all refrigerant is recovered and power is isolated before removing compressor and gas liquid separator.
Step Picture Work instruction
5. Install the new compressor/
gas liquid separator onto the
chassis.
After replacing the compressor/gas
liquid separator, tighten up the base
screw nuts.
6. Connect the brazing
interfaces of compressor/gas
liquid separator to the pipeline.
Braze the connection pipes of
compressor to connect them to the
compressor.
Note: When replacing the
compressor, avoid touching the
nearby pipeline and components.
7. Connect the compressor
wires.
Connect the compressor wires to
the wire terminals on the top of
compressor.
Note: When connecting the wires,
be sure to match the colors with the
corresponding wire terminals.

Haier GE APPLIANCES AUH4860ZGDA Specifications

General

Brand	Haier
Model	GE APPLIANCES AUH4860ZGDA
Category	Heat Pump
Language	English