Need help?Do you have a question about the Haier HBF600T and is the answer not in the manual?
Load washer correctly with appropriate fabric quantities for best results.
Divide laundry by fabric type and soiling, arrange loads uniformly.
Select programme based on fabric type to ensure optimal washing results.
Function for synthetics/woollens to prevent creases by pausing before final spin.
Use compartments 1, 2, 3 for pre-wash, wash detergent, and additives as specified.
Start wash cycle by pressing ON/OFF button after selecting programme and fabric type.
Machine stops automatically; switch off power using the ON/OFF button.
Clean the extractable detergent dispenser regularly with water for optimal performance.
Clean the machine filter monthly to ensure proper functioning. Follow Fig.8 instructions.
Check plug, door closure, and ON/OFF button press if the machine fails to start.
Verify tap is open and connected, and the inlet pipe is not bent.
Ensure the drain pipe is correctly positioned at least 80 cm above ground level.
Check drain pipe for blockages and ensure height is within 1 metre.
Use detergent for automatic machines and the correct amount as specified.
Ensure transit bolts are removed, machine is level, and load is balanced.
Check for power failure, water stop, or if the machine is in a rinse state.
To Next Page
General
