Remove the transport packaging (fig.1)
Remove the tape on the door (fig.2), the wall mounting kit and the inverted panel
film attached to the inside of the drum (fig.3) before starting the dryer.
Packing accessories
Check list of the accessories and materials provided with the machine:
To ensure the dryer operates normally, attention must be paid to the
following:
1. The rear of the dryer must not have any restriction to the intake of fresh
air.
fig.1
fig.2
Dimensions
a=830 mm
b=600 mm
c=560 mm
Weight=30 kg
INSTALLATION INSTRUCTIONS
2. Check the dryer for any damage. If any damage is found do not operate
and contact your supplier or Authorised Service Centre.
3.The dryer must be kept away from flammable substances.
4.The surrounding environment must be dry and ventilated.
5. For best results,the ambient temperature should be between 10
and 35 .
8
fig.3
Name Quantity
User manual 1
Wall mounting kit 1
Inverted panel film 1
Flexible hose 1
Flexible hose clip 1
Hose connector 1
Unpacking your dryer
Stacking kit 1
To Next Page
Loading...
Need help?
General
