Unpacking
1. Remove all packing materials. This includes the foam base and all adhesive
tape holding the washer accessories inside and outside. Slide out and remove
the bottom Styrofoam that is used to protect the washer from shipping damage
due to vibrations and shock.
2. Inspect and remove any remaining packing, tape or printed materials before
using the washer.
The bottom panel is located between the top foam used for
protection and box.
a
b
c
d
f
Check to make sure that the accessories are present and in
good condition. If you find that they are not in good condition
or are missing, please contact our customer service department
for assistance. Our Toll-Free number is
1-877-337-3639.
English
UNPACKING AND CHECKING PARTS
Parts
a) 1 Bottom Panel
b)
c) 1 Water Inlet Hose
d) 1 Drain Hook (Gooseneck)
e)
1 Quick Sink Faucet Adapter
6
Note:
FRONT
FACE TO FLOOR
g
Optional Caster
Wrench
Optional 4 Pack
h
g) Optfional 4 Casters
h) Caster wrench
2 Lock
i
6 Screws for the Bottom Plate
ng ands
B
e
Quick Sink
Faucet
Adapter
Silver Faucet
Connector
f )
To Next Page
Loading...
Need help?
General