Haier HLP21N User Manual

6
LOCATION REQUIREMENTS
•
 Thewashermustbeinstalledonasolidoortominimizevibrationduringthe
spincycle.Aconcreteoorisbest.
•
 Theoorshouldbelevelwithmaximumslopeof1"(25mm)underentirewasher.
•
A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
•
Do not install on carpeting.
•
The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of
power cord on the back of the washer.
•
Water faucet must be present within 3 ft. (0.9 m) of the connection on the
washer.
•
Only connect to cold water tap (faucet).
•
The water pressure should be between 20 and 100 psi (138 and 690 kPa).
WARNING
Do not install or operate the washer where it will be exposed to
temperatures below 32°F (0°C). Water remaining in the washer will
freeze and cause damage to the washer.
WASHER DIMENSIONS
17¹⁹⁄₃₂"
(44.7 cm)
17¼
"
(43.8 cm)
29²⁹⁄₃₂
"
(76.0 cm)

Haier HLP21N Specifications

General

Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Dimensions (WxDxH)	447 x 438 x 760 mm
Power requirements	120V, 60Hz
Door hinge	Up
Drum volume	28 L
Loading type	Top-load
Drum material	Stainless steel
Product color	White
Built-in display	No
Appliance placement	Freestanding
Drum capacity	- kg
Spin-drying class	-
Maximum spin speed	700 RPM
Number of washing programs	3
Package weight	51800 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	438 mm
Width	447 mm
Height	760 mm
Weight	43000 g